ONE: Disassembling Process & Documenting process
Before & After:)
So it started with removing something that doesn’t need a screwdriver, here they are ⬇️
Lens, Memory card, A piece of rubber
Then I got 2 simple small screwdrivers tools and started trying disassemble the camera with them⬇️
The problem at first⬇️
1. Too hard to unscrew then I messed up the screws. 2. Didn’t find the hiding sneaky screws🥲🥲🤬
So should I just break it from now⬆️?
But I decided not to break them yet
So I opened the middle part FINALLY!
Then 7 hrs disassembling started…⬇️
Yay! keep messing up the screws and keep adding tools to this whole process.
Some progress⬇️
It was actually pretty satisfying when I saw I there were more and more parts coming off.
Then I decided to take a dinner break🤭🤫🤪⬇️
Kept going ⬇️
Was getting late ⬇️
Was me in the studio at 9:30pm, but it was almost there😎
Then finally! It was 10:24pm
Yea, nice to meet you in this way, Canon:)
TWO: Parts
1.Surfaces and screws
2. Front screen and front bottoms
3. viewfinder and lens connecting parts
3. Exterior and led screen penal on the top
4. Everything in the middle and chips
THREE: Materials & Manufacturing
A lot of Google works here⬇️
| Part/piece | material | manufacturing tech applied |
| Body and Frame Materials | Magnesium Alloy | CNC Machining |
| Aluminum Alloy | Die Casting and Forging, | |
| Glass Fiber Reinforced Polycarbonate Resin | Anodizing | |
| Internal Components/Chips | Copper and Gold Alloys | Surface-Mount Technology |
| Stainless Steel | Injection Molding | |
| Plastics/Rubber | Injection Molding | |
| Lens Mounts and Contacts | Stainless Steel | |
| Brass | Precision Machining | |
| Gold-Plated Contacts | Gold Plating | |
| Shutter and Mirror Mechanism | Carbon Fiber Reinforced Materials | Laser Cutting and Micro-Machining, High-Speed Actuation Mechanisms |
| Steel | Injection Molding | |
| Aluminum | High-Speed Actuation Mechanisms | |
| LCD Screen and Viewfinder Materials | Gorilla Glass | Precision Glass Molding |
| Tempered Glass, Optical Glass | Multi-Coating Techniques | |
| Plastic | Injection Molding | |
| Exterior Surface Finish and Coating | Rubberized Coating | Thermal Spraying |
| Anodized or Powder Coating | Powder Coating | |
| Sealing and Protection | Rubber | Over-Molding Technology |
| Silicone Seals | Gasket Compression Sealing | |
| Sensor and Electronic Components | Silicon, Copper Wiring | Photolithography, Etching and Deposition, Backside Illumination (BSI) Technology, High-Density Interconnect (HDI) PCBs, System-on-Chip (SoC) Design |
| Optical Engineering and Glass Manufacturing | Aspherical Lens Elements | Precision Glass Molding |
| Ultra-Low Dispersion (UD) and Fluorite Elements | Multi-Coating Techniques |
Four: Culculating
Achievements…⬇️
