Siddhant’s Week 5 HW

include

define PIN 6

define NUM_LEDS 8

define BRIGHTNESS 50

// Parameter 1 = number of pixels in strip
// Parameter 2 = pin number (most are valid)
// Parameter 3 = pixel type flags, add together as needed:
// NEO_RGB Pixels are wired for RGB bitstream
// NEO_GRB Pixels are wired for GRB bitstream, correct if colors are swapped upon testing
// NEO_RGBW Pixels are wired for RGBW bitstream
// NEO_KHZ400 400 KHz bitstream (e.g. FLORA pixels)
// NEO_KHZ800 800 KHz bitstream (e.g. High Density LED strip), correct for neopixel stick
Adafruit_NeoPixel strip = Adafruit_NeoPixel(NUM_LEDS, PIN, NEO_GRBW + NEO_KHZ800);

void setup() {

strip.setBrightness(BRIGHTNESS);
strip.begin();
strip.show(); // Initialize all pixels to ‘off’
}

void loop() {
// Some example procedures showing how to display to the pixels:
// colorWipe(strip.Color(255, 0, 0), 50); // Red
// colorWipe(strip.Color(0, 255, 0), 50); // Green
// colorWipe(strip.Color(0, 0, 255), 50); // Blue
// colorWipe(strip.Color(0, 0, 0, 255), 50); // White
//
// whiteOverRainbow(20,75,5);
//
// pulseWhite(5);
//
// // fullWhite();
// // delay(2000);
//
// rainbowFade2White(3,3,1);
colorSidWipe(strip.Color(255, 81, 0),100);
colorSidWipe(strip.Color(239, 245, 66),100);
colorSidWipe(strip.Color(15, 2, 250),100);
}
void colorSidWipe(uint32_t c, uint8_t wait) {
for(uint16_t i=0; i<strip.numPixels(); i++) {
strip.setPixelColor(i, c);
strip.show();
delay(500);
}
}

Leave a comment

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s