The target users of my small night light are people who are used to getting up at night, and people who are used to putting things away.
The body part of the plush toy is separated from the light bulb by a metal ring and can be freely disassembled and assembled. The software parts can also be tied to various places for easy access.
Further development
The next step is to make the part containing the LED light and sew the metal ring at the joint. If necessary, consider placing a thin wire inside the strip to maintain its shape.
The teardown experience was amazing! To tell the truth, I have always dreaming of disassembling Apple’s products, thinking that its technical content and technological level are unparalleled, which is also the reason why I choose this product.
1.Teardown Process
1- This is the initial state of the product.
2- First remove the battery, small screws and wirings.
3- Next remove the rear camera and speakers.
4- Lift the covered wirings and remove the lock button and handset structure.
5- Then remove the mainboard.
6- Finally take out the screen.
2. Video Recorded
3. iPhone 4 Teardown
4. Materials
1-Battery: Li-polymer
2-Mainboard: Skyworks SKY77542 Tx–Rx iPAC™ FEM for Dual-Band GSM/GPRS: 880–915 MHz and 1710–1785 MHz bands, Skyworks SKY77541 GSM/GRPS Front End Module, STMicro STM33DH 3-axis accelerometer, Cirrus Logic 338S0589 audio codec……
3-Front glass panel: Corning Gorilla Glass
4-Frame: Stainless steel
5-Wirings: Ferrite polymer composites (FPC)
… …
5.Tools for Teardown
· Adjustable screwdriver kit
· Tweezers
· Open tools
6. Favorite Parts
One of the parts I’m most interested in is the vibrator. I was first attracted by its shape, which looks like a cylinder with another half cylinder strung on top of it, and can be rotated around it. It works by using a CAM (eccentric device) to rotate inside the phone, resulting in vibration.
I compared it with the vibrators of other products and found that its volume is actually much smaller than the usual products. I believe that in the future, with the improvement of the accuracy and requirements of mobile phone manufacturing, the production of vibrators will be more compact and precise.
Vibrator
2. The other part I’m interested in is the wiring. Because when I disassembled the parts, I actually sighed that all the lines were very precise and neat. It is hard to imagine how they are produced and assembled, and their role is so crucial in the production of mobile phones that I look forward to learning more about them and even learning to use them.
To Conclude / To Continue
” If you do something and it turns out pretty good, then you should go do something else wonderful, not dwell on it for too long. Just figure out what’s next.”
